Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Piaggio Vespa 125 LX

Model: Piaggio Vespa 125 Lx
Part: Clock

Video tutorial

Below we will see the information regarding changing the time on the display of the instrument panel of the Piaggio Vespa 125 LX scooter. First, turn on the instrument panel and start pressing the "mode" button to the left until you enter the clock setting (you will see the option flashing on the display), as shown in the video.

At this point, adjust the hour first and then the minutes, finally exiting the clock setting to save the changes made (by returning the mode button to its starting position); finally, turn off the instrument panel and start the engine!


Posted on 19 March 2026 by ScegliAuto


Related tutorials

How to set the clock on the Piaggio Vespa 125 LX?
How to set the clock on the Piaggio Vespa 125 LX?
Vespa 125 Lx To set the clock on the Piaggio Vespa 125 LX, insert the ignition key into the lock and turn it to activate the dashboard: then, press and hold the M…
How to Set the Time on the Piaggio Vespa 125 LX
How to Set the Time on the Piaggio Vespa 125 LX
Vespa 125 Lx In simple and brief steps, set the time displayed on the small screen of the instrument panel of the Piaggio Vespa 125 LX scooter, as well as the 50 …
How to set the clock of the Piaggio Vespa 125 LX
How to set the clock of the Piaggio Vespa 125 LX
Vespa 125 Lx The following steps will allow us to change the time on the display of the instrument panel of the Piaggio Vespa 125 LX scooter. First, turn on the i…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos