Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In simple and brief steps, set the time displayed on the small screen of the instrument panel of the Piaggio Vespa 125 LX scooter, as well as the 50 LX. First, place the scooter on the centre stand and turn on the instrument panel; then press the button located at the bottom to access the clock setting. Next, press the upper button to adjust the hour and then the minutes, as shown in the video. At this point, press the down button again to save the previously set time!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock of the Piaggio Vespa 125 LX
How to set the clock of the Piaggio Vespa 125 LX
Vespa 125 Lx The following steps will allow us to change the time on the display of the instrument panel of the Piaggio Vespa 125 LX scooter. First, turn on the i…
How to set the clock on the Piaggio Vespa 125 LX?
How to set the clock on the Piaggio Vespa 125 LX?
Vespa 125 Lx To set the clock on the Piaggio Vespa 125 LX, insert the ignition key into the lock and turn it to activate the dashboard: then, press and hold the M…
How do you replace the rearview mirror of the Piaggio Vespa 125 LX?
How do you replace the rearview mirror of the Piaggio Vespa 125 LX?
Vespa 125 Lx The procedure for replacing the rearview mirror on the Piaggio Vespa 125 LX involves loosening the old mirror by gripping it from the top and rotatin…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos