Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can change the engine oil on a Piaggio Beverly 300 by loosening the drain plug of the oil sump, which will be located at the central lower part of the vehicle: once the plug is removed, all the oil can drain into a suitably positioned container. At this point, you can also remove the corresponding oil filter located in the same position, replacing it with a new spare part. After this, you can top up by pouring the necessary amount of oil through the breather on the right side.

Posted on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Piaggio Beverly 300 Scooter
How to Change the Engine Oil in the Piaggio Beverly 300 Scooter
Beverly 300 Changing the engine oil in the Piaggio Beverly 300 scooter, as shown in this tutorial, is a very simple and quick operation. First, ensure the engine…
Change the Engine Oil and Oil Filter on the Piaggio Beverly 300
Change the Engine Oil and Oil Filter on the Piaggio Beverly 300
Beverly 300 This video will show you how to perform the routine maintenance service by changing the engine oil and oil filter on the Piaggio Beverly 300 scooter.…
How to Change the Engine Oil on a Piaggio Beverly 300 Scooter?
How to Change the Engine Oil on a Piaggio Beverly 300 Scooter?
Beverly 300 .. In this tutorial, we can see how to change the engine oil on a Piaggio Beverly 300 scooter, a very simple and quick operation. First,.. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos