Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on Piaggio Beverly 400

Model: Piaggio Beverly 400
Part: Engine oil

Video tutorial

You can change the engine oil on the Piaggio Beverly 400 by loosening the drain plug of the oil sump, which is located at the central bottom of the scooter: once the plug is removed, allow all the used oil to drain into a suitable container. At this point, you can also remove the filter located in the same position: then insert the new one and proceed with topping up. You will need to pour the necessary amount of fluid through the breather located on the right side of the scooter.


Posted on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Piaggio Beverly 400?
How to Replace the Exhaust on the Piaggio Beverly 400?
Beverly 400 You can completely replace the exhaust on the Piaggio Beverly 400 by unscrewing the screws that secure the exhaust terminal to its housing, which is …
How to Replace the Fuel Filter on the Piaggio Beverly 400
How to Replace the Fuel Filter on the Piaggio Beverly 400
Beverly 400 Below are the instructions for disassembling and replacing the fuel filter on the Piaggio Beverly 400 scooter. First, place the scooter on the centre…
How to Install the Clutch Disc on a Piaggio Beverly 350 or 400
How to Install the Clutch Disc on a Piaggio Beverly 350 or 400
Beverly 400 In this video, you can see how to assemble the oil bath clutch disc of a Piaggio Beverly 350 or 400. It is a kind of puzzle that should only be attem…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos