Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Piaggio Beverly 400

Model: Piaggio Beverly 400
Part: Fuel filter

Video tutorial

Below are the instructions for disassembling and replacing the fuel filter on the Piaggio Beverly 400 scooter. First, place the scooter on the centre stand and begin to remove the lower plastic fairing located on the side and above the fuel tank; then disconnect the fuel pump feed line and the electrical connector, as shown in the video.

At this point, unscrew the pump collar to remove it, gaining access to the fuel filter; remove it and replace it with the new one, reassembling everything!


Posted on 16 February 2026 by ScegliAuto


Related tutorials

How to Install the Clutch Disc on a Piaggio Beverly 350 or 400
How to Install the Clutch Disc on a Piaggio Beverly 350 or 400
Beverly 400 In this video, you can see how to assemble the oil bath clutch disc of a Piaggio Beverly 350 or 400. It is a kind of puzzle that should only be attem…
How to reset the service light on a Piaggio Beverly 400 scooter?
How to reset the service light on a Piaggio Beverly 400 scooter?
Beverly 400 In this tutorial, see how to reset the service light on a Piaggio Beverly 400 scooter, a very simple and quick operation. Before proceeding, ensure t…
How to Replace the Transmission on a Piaggio Beverly 400
How to Replace the Transmission on a Piaggio Beverly 400
Beverly 400 You can replace the transmission on a Piaggio Beverly 400 by loosening the screws that secure the cover located near the rear wheel on the left side:…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos