Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Piaggio Beverly 400 scooter?

Model: Piaggio Beverly 400
Part: Service warning light

Video tutorial

In this tutorial, see how to reset the service light on a Piaggio Beverly 400 scooter, a very simple and quick operation. Before proceeding, ensure that all required scheduled maintenance tasks have been completed.

Start by inserting the key but leave it in the initial position, then press and hold the "SET" button located in the centre of the dashboard while simultaneously turning on the instrument panel. At this point, keep the button pressed for about 5 seconds, or until the service light stops flashing.

Finally, restart the instrument panel.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on the Piaggio Beverly 400
How to Replace the Fuel Filter on the Piaggio Beverly 400
Beverly 400 Below are the instructions for disassembling and replacing the fuel filter on the Piaggio Beverly 400 scooter. First, place the scooter on the centre…
How to Set the Speedometer Unit on the Piaggio Beverly 400
How to Set the Speedometer Unit on the Piaggio Beverly 400
Beverly 400 This guide will show you how to change the speedometer unit on the Piaggio Beverly 400 scooter. First, place the scooter on its centre stand and pres…
How to replace the rear tyre on the Piaggio Beverly 400
How to replace the rear tyre on the Piaggio Beverly 400
Beverly 400 Today's step-by-step instructions will show you how to remove and replace the rear tyre and wheel of the Piaggio Beverly 400 scooter. First, place th…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos