Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will learn how to open the glove compartment on a Piaggio Liberty 150 S. To open the glove compartment, insert the key into the ignition switch and turn it to start the instrument cluster. Press the key into the ignition switch, and you will notice that the compartment below it will slightly open. Pull the drawer outwards to open it and place whatever you wish inside. To open the seat, it is important to keep the key in the ignition switch with the instrument cluster active. Press on the side to open the seat and place whatever you wish inside.

Posted on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil of the Piaggio Liberty 150 S
How to replace the engine oil of the Piaggio Liberty 150 S
Liberty 150 S Today's procedure will show us how to change the motor oil, performing the regular maintenance check, on the Piaggio Liberty 150 S scooter. First, we…
How to Replace the Battery on the Piaggio Liberty 150 S?
How to Replace the Battery on the Piaggio Liberty 150 S?
Liberty 150 S To replace the battery on the Piaggio Liberty 150 S, you need to lift the seat to access the components located in the under-seat compartment. At the…
Changing the Gear Oil of the Piaggio Liberty 150 S
Liberty 150 S In today's video tutorial, we will show how to change the transmission oil of the Piaggio Liberty 150 S scooter, as well as the Liberty 125. First, p…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos