Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the front brake pads on the Piaggio Vespa ET4, start by loosening the bolts that secure the front wheel to the corresponding hub. Once the wheel is removed from its position, proceed by loosening the bolts that secure the brake caliper to its housing on the disc. Once the caliper is freed, you can remove the pin that holds the pads in their position: this will allow you to reposition the caliper on the disc, securing it with the bolts and checking that everything functions correctly.

Posted on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Piaggio Vespa ET4
How to Replace the Front Brake Pads on the Piaggio Vespa ET4
Vespa Et4 You can replace the front brake pads on the Piaggio Vespa ET4 by loosening the nuts that secure the front wheel to the corresponding hub: you will th…
How to Replace the Fork Bearings on a Piaggio Vespa ET4
How to Replace the Fork Bearings on a Piaggio Vespa ET4
Vespa Et4 In this guide, we will provide instructions for removing and replacing the fork bearings on the front fork of a Piaggio Vespa ET4. First, place the s…
How to replace the headlight bulb in the Piaggio Vespa ET4 scooter?
How to replace the headlight bulb in the Piaggio Vespa ET4 scooter?
Vespa Et4 In this tutorial we can see how to replace the headlight bulb in the Piaggio Vespa ET4 scooter, an extremely simple and quick operation. First of all…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos