Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
From the instrument panel of the Piaggio Vespa 125 Primavera, you can clear the Service light by inserting the ignition key into the corresponding lock: once the key is turned to activate the instrument panel, press and hold the button located on the right side of the handlebar. Wait a few seconds with the button pressed to ensure the Service light is cleared from the instrument panel: once the light has been reset, you can release the button and then turn off the panel by removing the key.

Posted on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Piaggio Vespa Primavera 125?
How to Reset the Service Light on Piaggio Vespa Primavera 125?
Vespa 125 Primavera You can eliminate the Service light displayed on the instrument panel of the Piaggio Vespa Primavera 125 by turning on the ignition, inserting the ke…
How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
Vespa 125 Primavera Good morning, today’s guide aims to replace the spark plug on your Piaggio Vespa Primavera 125. Start by removing the side panels of the scooter. Nex…
How to Set the Clock on a Piaggio Vespa 125 Primavera
How to Set the Clock on a Piaggio Vespa 125 Primavera
Vespa 125 Primavera In this brief guide, you will learn how to set the clock on the Piaggio Vespa 125 Primavera. First, place it on the centre stand and turn on the inst…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos