Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Beverly 300
    4. : Headlight bulb replacement on Piaggio Beverly 300-350

Model: Piaggio Beverly 300
Part: Headlight bulb
Headlight bulb replacement on Piaggio Beverly 300-350

In this guide we will see the step-by-step instructions to be able to disassemble and replace the headlight bulb on a Piaggio Beverly 300 and 350 scooter. First let's unscrew the fixing screws of the headlight, which we find on the plastic cover near the instrument panel ; after which we unscrew the additional screws that we find below and the screws under the headlight, as in the video. At this point we extract the lighthouse towards the outside and remove the rubber protection; disconnect the electrical connector of the light bulb to remove it and replace it with the new one, of the right type (in this case of type H7)!


Posted on 30 January 2024 by ScegliAuto



Piaggio Beverly 300-350 headlight bulb replacement
Beverly 300 In today's video tutorial we will see how to remove and replace the headlight bulb of a Piaggio Beverly 300 and 350. First of all, let's remove the h
Headlight bulb replacement on Piaggio Beverly 300
Beverly 300 Let's see in this video how to remove and replace the headlight bulbs on a Piaggio Beverly 300 or 350, following the instructions below. First we are
Piaggio Beverly 300 IE headlight bulb replacement
Beverly 300 In this very simple video guide we will see how to remove and replace the headlight bulb of a Piaggio Beverly 300 IE. First of all, let's remove the

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos