Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Beverly 300
    4. : Headlight bulb replacement on Piaggio Beverly 300

Model: Piaggio Beverly 300
Part: Headlight bulb
Headlight bulb replacement on Piaggio Beverly 300

Let's see in this video how to remove and replace the headlight bulbs on a Piaggio Beverly 300 or 350, following the instructions below. First we are going to remove our windshield, going to unscrew the fixing screws of the brackets; after which we also remove the rearview mirrors, as shown in the video. At this point we unscrew the further screws of the light, which we find near and under the instrument panel, and remove the latter; we just have to disconnect the bulb cable and its clip, in order to remove it and replace it with the new one!


Posted on 18 January 2024 by ScegliAuto



Piaggio Beverly 300 IE headlight bulb replacement
Beverly 300 In this very simple video guide we will see how to remove and replace the headlight bulb of a Piaggio Beverly 300 IE. First of all, let's remove the
Headlight bulb replacement on Piaggio Beverly 300-350
Beverly 300 In this guide we will see the step-by-step instructions to be able to disassemble and replace the headlight bulb on a Piaggio Beverly 300 and 350 sco
Piaggio Beverly 300-350 headlight bulb replacement
Beverly 300 In today's video tutorial we will see how to remove and replace the headlight bulb of a Piaggio Beverly 300 and 350. First of all, let's remove the h

How do you replace the engine oil in the Kymco Xciting 400?

The replacement of the motor oil on the Kymco Xciting 400 can be done by unscrewing the drain plug of the oil tank, located in the central lower part of the vehicle: it will be possible to drain all the used oil into a properly positioned container. Next to the drain plug, you can also locate the oil filter, which must be removed from its housing and replaced with a new spare part. After the replacement, it will be necessary to top up the oil by inserting the new oil through the vent located on the left side of the vehicle.

Watch the video!


by ScegliAuto

More videos