Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here are the instructions and procedure for removing and replacing the dipped beam bulb of the front headlight of the Piaggio Beverly 300 scooter. First, place the scooter on its stand and start unscrewing the upper screws of the instrument panel cover; then remove the headlight by disconnecting the light connector, as shown in the video. At this point, remove the dipped beam bulb, replacing it with a new one (of the correct type and with the same fitting); check the light's operation, finally reassembling the front headlight.

Posted on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a Piaggio Beverly 300-350
Replacing the Front Headlight Bulb on a Piaggio Beverly 300-350
Beverly 300 In this guide, you will find step-by-step instructions to remove and replace the front headlight bulb on a Piaggio Beverly 300 and 350 scooter. First…
Replacing the Front Headlight Bulb of Piaggio Beverly 300-350
Replacing the Front Headlight Bulb of Piaggio Beverly 300-350
Beverly 300 In today's video tutorial, you will learn how to disassemble and replace the front headlight bulb of a Piaggio Beverly 300 and 350. First, remove the…
Replacing the headlight bulb on a Piaggio Beverly 300
Replacing the headlight bulb on a Piaggio Beverly 300
Beverly 300 In this video, we will see how to remove and replace the headlight bulb on a Piaggio Beverly 300 or 350, following the instructions below. First, rem…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos