Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the headlight bulb of the Piaggio Beverly 300 IE, you need to loosen the screws that secure the optical group to its housing: to do this, you will need to unscrew all the screws that secure the front panel of the fairing. The screws securing this panel will be located at the top of the instrument panel and below the handlebars: once all the screws have been loosened, you can remove the panel, unscrew the screws securing the headlight, and remove it. The bulb inside can then be replaced by inserting a new one.

Posted on 30 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb of the Piaggio Beverly 300
Replacing the Front Headlight Bulb of the Piaggio Beverly 300
Beverly 300 Here are the instructions and procedure for removing and replacing the dipped beam bulb of the front headlight of the Piaggio Beverly 300 scooter. Fi…
Replacing the Front Headlight Bulb on a Piaggio Beverly 300-350
Replacing the Front Headlight Bulb on a Piaggio Beverly 300-350
Beverly 300 In this guide, you will find step-by-step instructions to remove and replace the front headlight bulb on a Piaggio Beverly 300 and 350 scooter. First…
Replacing the Front Headlight Bulb of Piaggio Beverly 300-350
Replacing the Front Headlight Bulb of Piaggio Beverly 300-350
Beverly 300 In today's video tutorial, you will learn how to disassemble and replace the front headlight bulb of a Piaggio Beverly 300 and 350. First, remove the…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos