Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Beverly 300
    4. : Piaggio Beverly 300-350 headlight bulb replacement

Model: Piaggio Beverly 300
Part: Headlight bulb
Piaggio Beverly 300-350 headlight bulb replacement

In today's video tutorial we will see how to remove and replace the headlight bulb of a Piaggio Beverly 300 and 350. First of all, let's remove the headlight cap; to do this we unscrew the screws that we find under the lighthouse, on both sides, as shown in the video. At this point we unscrew the upper screws of the instrument panel to remove the front light; now we remove the protective rubber of the bulbs and unhook the fixing clips of the lamps themselves. We just have to remove them and replace them with new ones, of the right type (in this case of type H7).


Posted on 6 January 2024 by ScegliAuto



Headlight bulb replacement on Piaggio Beverly 300-350
Beverly 300 .. disassemble and replace the headlight bulb on a Piaggio Beverly 300 and 350 scooter. First let's unscrew the fixing screws of the headlight, which we..
Headlight bulb replacement on Piaggio Beverly 300
Beverly 300 .. to remove and replace the headlight bulbs on a Piaggio Beverly 300 or 350, following the instructions below. First we are going to remove our windshield,..
Piaggio Beverly 300 IE headlight bulb replacement
Beverly 300 .. to remove and replace the headlight bulb of a Piaggio Beverly 300 IE. First of all, let's remove the screws at the bottom of the instrument panel with..

How do you replace the engine oil in the Kymco Xciting 400?

The replacement of the motor oil on the Kymco Xciting 400 can be done by unscrewing the drain plug of the oil tank, located in the central lower part of the vehicle: it will be possible to drain all the used oil into a properly positioned container. Next to the drain plug, you can also locate the oil filter, which must be removed from its housing and replaced with a new spare part. After the replacement, it will be necessary to top up the oil by inserting the new oil through the vent located on the left side of the vehicle.

Watch the video!


by ScegliAuto

More videos