Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we will see how to remove and replace the front light bulb on a Piaggio Vespa LX 50 and 150 in simple and quick steps. First, remove the front logo by prying it from the sides; then unscrew the screws located underneath to remove the plastic front fairing, as shown in the video. Now, unscrew the additional screws found under the light and on the instrument panel cover; remove both mirrors and detach the entire light unit. All that’s left is to disconnect the electrical connector of the bulb to remove and replace it!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Piaggio Vespa 50 LX
How to Replace the Rear Light Bulb on a Piaggio Vespa 50 LX
Vespa 50 Lx To replace the rear light bulb on a Piaggio Vespa 50 LX, first loosen the two side screws that secure the rear light within its housing, allowing you…
Replacing Front Shock Absorber on Piaggio Vespa 50 LX
Replacing Front Shock Absorber on Piaggio Vespa 50 LX
Vespa 50 Lx In this video, we will see how to remove and replace the front suspension of a Piaggio Vespa 50 LX. First, position the vehicle on the centre stand a…
Replacing the Front Brake Pads on the Piaggio Vespa 50 LX
Replacing the Front Brake Pads on the Piaggio Vespa 50 LX
Vespa 50 Lx This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter o…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos