Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service on a Piaggio Beverly 350 Scooter

Model: Piaggio Beverly 350
Part: Checks and maintenance

Video tutorial

This guide shows how to service the Piaggio Beverly 350 Sport scooter. After placing the scooter on its stand, perform a noise and compression test on the engine.

Clean the engine by adding an additive to the engine oil and running the engine for 15 minutes; at the same time, clean the fuel system with the appropriate additive. You can proceed to replace the air filter after removing the protective cover.

At this stage, it is also good to clean the throttle body with the proper cleaner. Refit the new filter and close the box. Proceed to drain the used engine oil through the drain valve and replace the old oil filter.

Fill the tank with new lubricant, ensuring it meets the specifications required by the manufacturer. Check the oil level and perform a second compression test.

Replace the spark plug and let the engine run for a few minutes. Recheck the engine oil level.

The service is complete.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to service the Piaggio Beverly 350
How to service the Piaggio Beverly 350
Beverly 350 In today's video, you will see how to perform a complete service on your Piaggio Beverly independently. Follow the recommended timings and types of p…
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
How to Replace the Front Headlight Bulb on a Piaggio Beverly 350
Beverly 350 The main instructions in this guide will show you how to disassemble and replace the dipped beam bulb of the front headlight on the Piaggio Beverly 3…
How do you replace the front headlight bulb of the Piaggio Beverly 350?
How do you replace the front headlight bulb of the Piaggio Beverly 350?
Beverly 350 It will be possible to replace the headlight bulb of the Piaggio Beverly 350 by loosening the screws that secure the headlight to its housing: the fi…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos