Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the dashboard bulbs on a Piaggio Beverly 300, first remove the five screws securing the visor, then take off the visor and subsequently the wing mirrors. Once done, remove the screws located under the instrument cluster and the front screws shown in the video. Using a lever, detach the fairing: this will expose the rear of the instrument cluster, from which you can replace the bulbs. The LED holder should be removed with pliers and replaced with a new piece; after insertion, it is advisable to test for proper operation.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb of Piaggio Beverly 300-350
Replacing the Front Headlight Bulb of Piaggio Beverly 300-350
Beverly 300 In today's video tutorial, you will learn how to disassemble and replace the front headlight bulb of a Piaggio Beverly 300 and 350. First, remove the…
How to Replace the Exhaust on a Piaggio Beverly 300?
How to Replace the Exhaust on a Piaggio Beverly 300?
Beverly 300 To replace the exhaust on a Piaggio Beverly 300, loosen the screws located at the top and bottom to detach the plastic protective trim. Once the trim…
How to Reset the "Service" Light on a Piaggio Beverly 300
How to Reset the "Service" Light on a Piaggio Beverly 300
Beverly 300 Before you begin, sit on the seat of your Piaggio Beverly 300. Start by pressing and holding the "Mode" button located on the right indicator stalk. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos