Do it yourself
| ||||
|
Model: Piaggio Vespa 150 Lx
In this video tutorial we will see the instructions that will allow us to remove and replace the rear wheel on the Piaggio Vespa ET4, but also on the 125 and 150 LX. First we put the central stand to our scooter and we go to disassemble our muffler, unscrewing the screws of the silencer; then we are going to remove the cotter pin of the central nut, pulling it off with pliers. At this point we unscrew the nut with a socket wrench, in order to remove the wheel; we just have to remove the wheel permanently, following the video until the end for reassembly!
Posted on 7 March 2024 by ScegliAuto
|
How do you change the engine oil of the BMW R 1200 GS?The replacement of the engine oil of the BMW R 1200 GS is carried out by loosening the bolts that secure the skid plate positioned in the lower part of the bike. Once this plate has been removed, it will be possible to unscrew the drain plug below, so that the used oil can be collected inside a suitably positioned container. Next to the drain plug you will find the oil filter, which in turn must be extracted and replaced with a new one. After the replacement, it will be possible to top up from the special vent on the crankcase to the left of the bike. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |