Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Piaggio Vespa 150 LX

Model: Piaggio Vespa 150 Lx
Part: Engine oil

Video tutorial

To change the engine oil on the Piaggio Vespa 150 LX, access the underside of the scooter to unscrew the oil drain plug; by unscrewing this plug, you can collect all the used oil in a suitably placed container. Next to the drain plug, you will also find the oil filter, which must be unscrewed and removed from its location.

After removal, you can insert the new filter and close the drain plug, topping up with new oil from the filler located on the left side of the scooter, near the rear wheel.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to replace the motor oil in the Piaggio Vespa 150 LX scooter?
How to replace the motor oil in the Piaggio Vespa 150 LX scooter?
Vespa 150 Lx In this tutorial we can see how to replace the engine oil in the Piaggio Vespa 150 LX scooter, an extremely simple and quick operation. First of all,…
How to Change the Engine Oil on the Piaggio Vespa 150 LX Scooter?
How to Change the Engine Oil on the Piaggio Vespa 150 LX Scooter?
Vespa 150 Lx In this tutorial, see how to change the engine oil on the Piaggio Vespa 150 LX scooter, a very simple and quick operation. First, ensure that the eng…
How to replace the transmission on the Piaggio Vespa 150 3V?
How to replace the transmission on the Piaggio Vespa 150 3V?
Vespa 150 Lx To replace the transmission on the Piaggio Vespa 150 3V, you need to loosen the screws that secure the transmission cover, located near the rear whee…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos