Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Fork on the Piaggio Si - Ciao - Bravo

Model: Piaggio Ciao
Part:

Video tutorial

In this tutorial, you will learn how to dismantle the front fork on the Piaggio Ciao 50 cc, as well as on the Si, Bravo, and Garelli. First, place the central stand and start by removing the front light by unscrewing the two screws of the light unit; then remove the grips and various cables from the handlebars, as illustrated in the video.

Next, dismantle the front wheel by unscrewing the nuts; then loosen the upper cotter pin of the fork. Now remove the nut and the small bearing and slide the fork downwards to remove it!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to disassemble the clutch of the Piaggio Ciao - Si - Bravo
How to disassemble the clutch of the Piaggio Ciao - Si - Bravo
Ciao .. of the Piaggio Ciao, as well as the Si and the Bravo. First, we put the center stand and start by removing the right side cover, unscrewing the fixing.. …
How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
Ciao .. of the Piaggio Ciao, as well as the Si, Bravo, and Garelli. First, put the central stand down and start by removing the plastic cover above.. …
How to Remove the Handlebars of the Piaggio Ciao, Bravo, Si
How to Remove the Handlebars of the Piaggio Ciao, Bravo, Si
Ciao .. handlebars of the Piaggio Ciao, as well as the Bravo and Si. First, place the central stand and start by removing the screws of the front headlamp.. …

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos