Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Piaggio X 9

Model: Piaggio X 9
Part: Service warning light

Video tutorial

To reset the light on the Piaggio X 9, turn the key to switch on the instrument panel; then, loosen the screws that secure the front fairing, which are located just above the manufacturer's logo. Once the screws are loosened, you can completely detach the front fairing and press the RES button located underneath the fairing.

By holding the button for a few seconds, you will notice that the Service light on the panel will turn off. To confirm the reset, you need to switch off and then switch on the instrument panel again.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Piaggio X9
How to Reset the "Service" Light on a Piaggio X9
X 9 Before starting, position your Piaggio X9 on the centre stand. Begin by removing the front fairing by unscrewing the fastening screws. Next, press th…
How to replace the battery of the Piaggio X 9?
How to replace the battery of the Piaggio X 9?
X 9 To replace the battery of the Piaggio X 9, open the under-seat compartment by lifting the seat itself. At the back of the under-seat compartment, the…
How to Replace the Rear Light Bulb on a Piaggio X9
How to Replace the Rear Light Bulb on a Piaggio X9
X 9 To replace the rear light bulb on a Piaggio X9, you need to remove the luggage compartment located at the rear of the bike to access the rear mudguar…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos