Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Piaggio X 9?

Model: Piaggio X 9
Part: Battery

Video tutorial

To replace the battery of the Piaggio X 9, open the under-seat compartment by lifting the seat itself. At the back of the under-seat compartment, there will be two screws that need to be loosened so that the rear fairing, positioned between the two headlights, can be removed.

Under this fairing, you will find the battery, which can be removed from its housing after loosening the fixing bolts and disconnecting the terminals. Once the old battery is removed, you can install a new one and close it with the fairing.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Piaggio X9
How to Reset the "Service" Light on a Piaggio X9
X 9 Before starting, position your Piaggio X9 on the centre stand. Begin by removing the front fairing by unscrewing the fastening screws. Next, press th…
How to Replace the Rear Light Bulb on a Piaggio X9
How to Replace the Rear Light Bulb on a Piaggio X9
X 9 To replace the rear light bulb on a Piaggio X9, you need to remove the luggage compartment located at the rear of the bike to access the rear mudguar…
How to Reset the Service Light on the Piaggio X 9
How to Reset the Service Light on the Piaggio X 9
X 9 To reset the light on the Piaggio X 9, turn the key to switch on the instrument panel; then, loosen the screws that secure the front fairing, which a…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos