Do it yourself
Frequently asked questions about cars and motorcycles
In this short and simple video, you will see how to remove and replace the air filter of the Piaggio Nrg 50 scooter, as well as the Zip and Phantom F12 from Malaguti. First, put the scooter on its centre stand and start by unscrewing the fixing screws of the air filter box cover, which is located on the left; then remove the small foam filter found inside, as shown in the video. At this point, clean the filter or replace it directly with a new one; then reassemble everything by applying the reverse procedure!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Nrg To replace the air filter on the Piaggio NRG, loosen the screws securing the cover of the casing located directly above the transmission casing, near…
(Various brands) Nrg To replace the air filter on the Piaggio NRG, loosen the screws securing the cover of the casing located on the left side of the bike, just above the…
(Various brands) Nrg This guide explains how to dismantle and replace the variator on the Piaggio Nrg scooter, following the instructions below. First, place the scooter …

Replacing the Battery in a BMW K1200 LT

Here are the main instructions for removing and replacing the battery in a BMW K1200 LT motorcycle. First, place the bike on its centre stand and remove the rider's seat. Underneath, you will find the battery, where you will disconnect both terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and same amperage. Reconnect the electrical terminals and test the battery by starting the engine!

Watch the video!


by ScegliAuto

More videos