Do it yourself
Frequently asked questions about cars and motorcycles
To replace the air filter on the Vespa GTS 300, you need to loosen the screws that secure the side panel of the fairing located at the rear of the scooter. Once this panel is removed, you will have access to the air filter cover, which is located underneath. After removing this by loosening the screws, you can extract the air filter inside and replace it with a new spare part. After installation, close the cover and reattach the previously removed side panel.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Vespa Gts 300 To replace the air filter on the Piaggio Vespa GTS 300, you will need to loosen the screws that secure the cover panel located on the casing near the…
Vespa Gts 300 It will be possible to replace the air filter of the Piaggio Vespa GTS 300 by loosening the screws that secure the rear wheel cover panel located on …
Vespa Gts 300 Today's guide will show you how to disassemble and replace the rollers and variator on the Piaggio Vespa GTS 300 scooter. First, place your scooter o…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos