Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Piaggio Vespa LX Scooter

Model: Piaggio Vespa 150 Lx
Part: Headlight bulb

Video tutorial

As shown in this tutorial, replacing the dipped beam bulb on a Piaggio Vespa LX scooter is a very simple and quick operation. First, remove the front badge and unscrew the bolt underneath, then remove the panel and continue by unscrewing the next bolt located just below the headlamp.

Next, remove both wing mirrors, unscrew the two lower screws, and unclip the handlebar cover fairing. At this point, simply disconnect the power connector, remove the rubber cover, and replace the bulb.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Bulb and Front Headlight on a Piaggio Vespa 150 LX
How to Replace the Bulb and Front Headlight on a Piaggio Vespa 150 LX
Vespa 150 Lx In this guide, see how to disassemble and replace the front optical unit and bulb on a Piaggio Vespa 150 LX. First, place your scooter on the central…
How to Replace the Battery in a Piaggio Vespa 150 LX Scooter
How to Replace the Battery in a Piaggio Vespa 150 LX Scooter
Vespa 150 Lx In this tutorial, you will see how to replace the battery in a Piaggio Vespa 150 LX scooter, a very simple and quick operation. First, ensure that th…
How to Change the Engine Oil on the Piaggio Vespa 150 LX Scooter?
How to Change the Engine Oil on the Piaggio Vespa 150 LX Scooter?
Vespa 150 Lx In this tutorial, see how to change the engine oil on the Piaggio Vespa 150 LX scooter, a very simple and quick operation. First, ensure that the eng…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos