Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb and Front Headlight on a Piaggio Vespa 150 LX

Model: Piaggio Vespa 150 Lx
Part: Headlight

Video tutorial

In this guide, see how to disassemble and replace the front optical unit and bulb on a Piaggio Vespa 150 LX. First, place your scooter on the central stand and start by removing the manufacturer's badge on the front shield; then unscrew the screws underneath, subsequently removing the rear-view mirrors as shown in the video.

At this point, remove the plastic cover behind the instrument panel, disconnecting the electrical connector of the optical unit to remove it; then replace the bulb by removing the rubber cover and unhooking the metal clip!


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulb on a Piaggio Vespa LX Scooter
How to Replace the Dipped Beam Bulb on a Piaggio Vespa LX Scooter
Vespa 150 Lx As shown in this tutorial, replacing the dipped beam bulb on a Piaggio Vespa LX scooter is a very simple and quick operation. First, remove the front…
How to replace the transmission on the Piaggio Vespa 150 3V?
How to replace the transmission on the Piaggio Vespa 150 3V?
Vespa 150 Lx To replace the transmission on the Piaggio Vespa 150 3V, you need to loosen the screws that secure the transmission cover, located near the rear whee…
How to Replace the Drive Belt on a Piaggio Vespa 150 LX
How to Replace the Drive Belt on a Piaggio Vespa 150 LX
Vespa 150 Lx This guide explains how to remove and replace the drive belt on a Piaggio Vespa LX 150, following the instructions below. First, place the central st…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos