Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug on the Vespa ET4 125, first open the seat and remove the helmet compartment under the seat to access the engine. Locate the spark plug on the right side, covered by the typical "cap". Carefully pull off the cap, ensuring not to pull on the wire. Now, use the supplied tool to unscrew the spark plug with a cross-head screwdriver, turning counter-clockwise. Given the limited space, it is advisable to use the tool only to loosen the spark plug, then continue unscrewing it by hand. Replace the spark plug.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plug of the Piaggio Vespa 150 ET4
How to replace the spark plug of the Piaggio Vespa 150 ET4
Vespa Et4 The following steps will show us how to disassemble and replace the spark plug of the Piaggio Vespa 150 ET4 scooter engine. First of all, we put the …
How to Replace the Spark Plug on Piaggio Vespa ET4 125
How to Replace the Spark Plug on Piaggio Vespa ET4 125
Vespa Et4 Today's instructions will guide you through removing and replacing the spark plug on the Piaggio Vespa ET4 125 scooter in simple steps. First, place …
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Vespa Et4 Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos