Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Windscreen on a Vespa

Model: Piaggio Vespa 150 Lx
Part: Windshield

Video tutorial

In today's video, see how to install the low windscreen on a Vespa. Start by fitting the nut onto the mounting bracket and tightening it. Then insert the ring and the plastic cover.

Next, fit the washers and proceed to screw the parts together. Repeat the same process for the other bracket, following the previous steps.

Once done, insert the rubber grommets onto the windscreen and then install the brackets onto the front shield of the scooter. You can then fit the windscreen onto the two brackets and tighten the corresponding screws.

Operation complete.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to disassemble the windshield of the Piaggio Vespa 150 LX
How to disassemble the windshield of the Piaggio Vespa 150 LX
Vespa 150 Lx Today's step-by-step instructions will allow us to disassemble and replace the windshield or front visor of the Piaggio Vespa 150 LX scooter. First, …
How to Replace the Battery in a Piaggio Vespa 150 LX Scooter
How to Replace the Battery in a Piaggio Vespa 150 LX Scooter
Vespa 150 Lx In this tutorial, you will see how to replace the battery in a Piaggio Vespa 150 LX scooter, a very simple and quick operation. First, ensure that th…
Where is the Battery on a Vespa 150?
Where is the Battery on a Vespa 150?
Vespa 150 Lx If you need to access the battery on your Vespa 150 but don't know where it is located, don't worry; this mini guide will provide all the information…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos