Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Mp3 500
    4. : How to replace the headlight bulb on the Piaggio MP3 500?

Model: Piaggio Mp3 500
Part: Light bulb
How to replace the headlight bulb on the Piaggio MP3 500?

In order to replace the Piaggio MP3 headlight bulb, you need to loosen the screws that secure the windscreen and the fairing located immediately above the headlight. Once these two parts have been removed, it will be possible to loosen the screws that secure the headlight and also remove it from its housing. Once it has been removed, it will be possible to open its back and extract the bulb from the inside. This will then have to be replaced with a new one, which will be inserted and connected to the connector. When finished, you will be able to install all the removed parts.


Posted on 21 June 2022 by ScegliAuto



Replace the Piaggio MP3 500 headlight bulb
Mp3 500 In this short and simple guide, let's see how to replace the headlight bulb of the Piaggio MP3 500 scooter. First of all, put our scooter on the cent
How to replace the rear light bulbs on the Piaggio MP3 500 scooter?
Mp3 500 Replacing the rear headlight bulbs on the Piaggio MP3 500 scooter, as we can see in this tutorial, is an extremely simple and fast operation. Before
How to reset the maintenance light on the Piaggio MP3 500
Mp3 500 For this brief guide we will see how to reset the maintenance light for the Piaggio MP3 500. It should be noted that the following procedure is also

Replace the brake and clutch levers on the Kawasaki ZX 6R

In today's video tutorial we will see how to remove and replace the brake and clutch levers on the Kawasaki Ninja ZX 6R, 636, but also on the ZX 10R. First of all we proceed with disassembling our front brake lever; to do this we unscrew the central pin, using a screwdriver and a Phillips wrench, as shown in the video. At this point we remove and replace the lever with the new one, of the right type; we then carry out the adjustment of the stroke of the lever. In the same way we then move on to replacing the clutch lever, disconnecting the cable and reassembling everything!

Watch the video!


by ScegliAuto

More videos