Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of the Vespa GTS 250

Model: Piaggio Vespa Gts 250
Part: Wheel

Video tutorial

To remove the rear wheel of the Vespa GTS 250, use a 5 mm socket to undo the bolt of the exhaust clamp, then use a 6 mm socket to undo the bolt at the bottom of the exhaust and with an Allen key, remove the two upper bolts of the exhaust, taking it off. Using pliers, remove the circlip that holds the bolt cover of the rear casing, also removing the bolt cover.

With an Allen key, undo the two bolts on the right side of the casing.

Use a socket to undo the nut of the rear shock absorber. Take a strap and hold the rear brake lever pulled so that the rear wheel does not turn, then use a socket to undo the wheel hub bolt.

With an Allen key, undo the five bolts that hold the wheel to the hub and remove it. To refit the wheel, follow the reverse procedure of removal.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of the Vespa 250 GTS
How to Remove the Rear Wheel of the Vespa 250 GTS
Vespa Gts 250 In this guide, we will see how to remove the rear wheel from the Vespa GTS 250 with electronic injection. This procedure is also applicable to other …
How to Remove the Engine from the Piaggio Vespa GTS 250 - 300
How to Remove the Engine from the Piaggio Vespa GTS 250 - 300
Vespa Gts 250 In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the…
How do you set the clock on the Piaggio Vespa GTS 250?
How do you set the clock on the Piaggio Vespa GTS 250?
Vespa Gts 250 In order to adjust the clock of the Piaggio Vespa GTS 250, you need to insert the ignition key into the ignition switch and turn it to turn on the in…

How to Replace the Air Filter on a Harley Davidson Sportster?

To replace the air filter on a Harley Davidson Sportster, loosen the screws securing the chrome cover on the right side of the bike, just below the fuel tank. Once these screws are loosened, you can remove the cover and access the air filter underneath: now loosen the screws that secure the filter in place, so you can insert the new one. This can now be secured in place with the screws, reattach the cover, and check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos