Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Et4
Part: Wheel

Removing the rear wheel on a Vespa Piaggio ET4 or Zip Gilera is the same process as they are built in the same way. Remove the plastic cover of the central wheel bolt. You will need to remove the cotter pin with a flat-head screwdriver. Once you have lifted it slightly with a screwdriver, simply pull it out with pliers. Remove the cover underneath. At this point, you only have the 24 mm nut; just unscrew it and take off the rim. Remember to place a spacer under the casing to allow the rim to drop.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fork Bearings on a Piaggio Vespa ET4
How to Replace the Fork Bearings on a Piaggio Vespa ET4
Vespa Et4 In this guide, we will provide instructions for removing and replacing the fork bearings on the front fork of a Piaggio Vespa ET4. First, place the s…
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Vespa Et4 Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the …
How to replace the spark plug of the Piaggio Vespa 150 ET4
How to replace the spark plug of the Piaggio Vespa 150 ET4
Vespa Et4 The following steps will show us how to disassemble and replace the spark plug of the Piaggio Vespa 150 ET4 scooter engine. First of all, we put the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos