Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Zip
    4. : How to replace the Piaggio Zip headlight bulb?

Model: Piaggio Zip
Part: Headlight bulb
How to replace the Piaggio Zip headlight bulb?

In order to replace the Piaggio Zip headlight bulb, you need to loosen the screws that secure the internal fairing of the motorcycle steering, positioned immediately under the knobs. Once these screws have been loosened, it will be possible to detach the inner fairing and access the rear part of the bulb: this will have to be disconnected from its connector and removed from inside its housing. In this way it will be possible to connect the new one to the connector, inserting it inside its housing and also mounting the fairing.


Posted on 31 July 2022 by ScegliAuto



How to replace the battery of the Piaggio Zip.
Zip Below we will see the instructions that will allow us to disassemble and replace the battery of the Piaggio Zip scooter, following these simple steps
How to replace the instrument panel bulbs on the Piaggio Zip scooter?
Zip In this tutorial, we can see how to replace the instrument panel bulbs on the Piaggio Zip scooter, an extremely simple and quick operation. Before pr
How do you install the windshield on the Piaggio Zip?
Zip In order to install the windshield on the Piaggio Zip, you need to insert the appropriate fixing rods into their respective housings, which are locat

How to bleed the brake system of the Kymco GP125

The guide shows how to bleed the Kymco GP125 brake oil system. After securing the vehicle and protecting the upper fairing with rags, unscrew the two fixing screws of the brake fluid reservoir cap and remove the covers. Using an 8mm wrench, loosen the bleed valve on the front caliper and install the drain hose. Activate the brake to let the fluid flow out of the system. Remove the brake caliper, push the piston all the way and clean it with a special spray. Reassemble everything in place and, if necessary, top up the fluid. Check the correct functioning of the brakes before taking the road.

Watch the video!


by ScegliAuto

More videos