Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the headlight bulb on the Piaggio Zip 100 scooter, an operation that is extremely simple and quick. First of all, let's make sure that the key is not inserted, so we can operate safely. Then, let's locate the three screws that secure the rear cover of the handlebar, unscrew them, and remove the cover. Next, let's grasp the bulb holder, slightly rotate it counterclockwise, and pull it out of the headlight. At this point, all that remains is to disconnect the old bulb, connect the replacement, and reassemble everything by following the reverse procedure.

Posted on 13 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on the Piaggio Zip
How to Replace the Engine Oil and Oil Filter on the Piaggio Zip
Zip Regular maintenance service should be performed on every vehicle to ensure the proper functioning of the engine; here’s how to replace the engine oil…
How to Replace the Front Headlight Bulb on the Piaggio Zip 50?
How to Replace the Front Headlight Bulb on the Piaggio Zip 50?
Zip To replace the bulb on the Piaggio Zip 50, you will need to unscrew the screws of the handlebar casing to access the optical group. Once the panels a…
How to Replace the Headlight Bulb on a Piaggio Zip?
How to Replace the Headlight Bulb on a Piaggio Zip?
Zip To replace the headlight bulb on a Piaggio Zip, loosen the screws securing the internal steering cover of the scooter, located just below the grips. …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos