Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speedometer Cable of the Piaggio Zip 50

Model: Piaggio Zip

Video tutorial

In this video tutorial, you will see the steps to remove and replace the speedometer cable of the Piaggio Zip 50 scooter, following the instructions below. First, place the scooter on the stand and start by disconnecting the speedometer cable from the front wheel by unscrewing the adjusting screw; then remove the grille to detach the speedometer cable from the instrument panel, as shown in the video.

At this point, install the new speedometer cable, making the adjustment on the wheel, and then check the operation of the speedometer!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Speedometer Cable on a Piaggio Zip
How to Replace the Speedometer Cable on a Piaggio Zip
Zip To replace the speedometer cable on a Piaggio Zip, open the glove compartment located under the dashboard; by opening it and loosening the screws ins…
How to replace the speedometer cable of the Piaggio Zip
How to replace the speedometer cable of the Piaggio Zip
Zip To replace the speedometer cable of the Piaggio Zip, we must first dismantle or move the windshield to access the back of the dashboard and disconnec…
How to Replace the Rear Brake Cable on the Piaggio Zip
How to Replace the Rear Brake Cable on the Piaggio Zip
Zip To replace the rear brake cable on the Piaggio Zip, you need to loosen all the screws securing the internal fairings of the scooter, specifically the…

How to Replace the Front Headlight Bulbs on a KTM Duke 125?

Replacing the front headlight bulb on the KTM Duke 125, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not inserted, then using a Torx screwdriver, remove both the bolts and the rivets securing the front fairing and separate it from the handlebars. Next, remove the large rubber cap located at the back of the headlight, disconnect the power connector, and unlock the metal clip. Once the bulb is extracted, insert the replacement without touching the glass directly with your bare hands, and finally reassemble everything.

Watch the video!


by ScegliAuto

More videos