Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speedometer cable of the Piaggio Zip

Model: Piaggio Zip
Part:

Video tutorial

To replace the speedometer cable of the Piaggio Zip, we must first dismantle or move the windshield to access the back of the dashboard and disconnect the cable attachment. We move or cut the cable in the fork area on the wheel side to free it; if the cable is stuck, push it from the wheel side to move it upwards using pliers or wire.

Lubricate the new cable and its sheath with grease to facilitate its sliding. Insert the new cable from the wheel side pushing the sheath until it reaches the hole.

Once inserted, connect the cable to the instrument panel ensuring that the locking tab is securely attached, complete the replacement procedure by mounting the windshield.


Posted on 5 October 2025 by ScegliAuto


Related tutorials

How to Replace the Speedometer Cable of the Piaggio Zip 50
How to Replace the Speedometer Cable of the Piaggio Zip 50
Zip In this video tutorial, you will see the steps to remove and replace the speedometer cable of the Piaggio Zip 50 scooter, following the instructions …
How to Replace the Speedometer Cable on a Piaggio Zip
How to Replace the Speedometer Cable on a Piaggio Zip
Zip To replace the speedometer cable on a Piaggio Zip, open the glove compartment located under the dashboard; by opening it and loosening the screws ins…
How to Replace the Rear Brake Cable on the Piaggio Zip
How to Replace the Rear Brake Cable on the Piaggio Zip
Zip To replace the rear brake cable on the Piaggio Zip, you need to loosen all the screws securing the internal fairings of the scooter, specifically the…

How to Replace the Shaft Seals on the GasGas EC 125?

To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos