Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Installing a windscreen on the Piaggio Liberty 150 scooter is a straightforward task; let's see how to proceed in this tutorial. First, gather all the windscreen components, then assemble the support brackets following the instructions. Insert the rubber buffers into the holes and connect the two elements without tightening the bolts yet. Next, locate the holes at the bottom of the handlebars, insert the windscreen supports, and tighten the respective bolts. Complete the operation by ensuring that every remaining screw is fully tightened.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Piaggio Liberty 150 Scooter
How to Change the Engine Oil on a Piaggio Liberty 150 Scooter
Liberty 150 S In this tutorial, you will see how to change the engine oil on a Piaggio Liberty 150 scooter, an extremely simple and quick operation. First, ensure …
How to replace the engine oil of the Piaggio Liberty 150 S
How to replace the engine oil of the Piaggio Liberty 150 S
Liberty 150 S Today's procedure will show us how to change the motor oil, performing the regular maintenance check, on the Piaggio Liberty 150 S scooter. First, we…
Changing the Gear Oil of the Piaggio Liberty 150 S
Liberty 150 S In today's video tutorial, we will show how to change the transmission oil of the Piaggio Liberty 150 S scooter, as well as the Liberty 125. First, p…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos