Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plug on a Piaggio Vespa 150 LX

Model: Piaggio Vespa 150 Lx
Part: Spark plugs

Video tutorial

To replace the spark plug on a Piaggio Vespa 150 LX, open the under-seat compartment by lifting the seat. Once you have access, loosen the screws securing the under-seat compartment, which must be completely removed to access the underlying parts.

In the side area of the engine, you will find the spark plug, which must be disconnected from its cable and removed from its housing using the appropriate socket wrench. After removal, insert the new spark plug and reassemble all previously removed components.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

Vespa 150 Lx This guide explains how to remove and replace the drive belt on a Piaggio Vespa LX 150, following the instructions below. First, place the central st…
Vespa 150 Lx To replace the transmission on the Piaggio Vespa 150 3V, you need to loosen the screws that secure the transmission cover, located near the rear whee…
Vespa 150 Lx In this video tutorial, follow the instructions to remove and replace the rear wheel on the Piaggio Vespa ET4, as well as the 125 and 150 LX. First, …

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos