Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of a Vespa GTS 125

Model: Piaggio Vespa Gts 125
Part: Wheel

Video tutorial

To remove the rear wheel of the Vespa GTS 125, first remove the exhaust by unscrewing the bolts that secure it to its supports and loosening the clamp that connects it to the rest of the exhaust system. Once the exhaust is removed, loosen the bolts that secure the support located opposite the swingarm, completely removing it. This will provide access to the bolts that secure the wheel itself, which can now be removed and replaced with a new spare part; after replacement, reinsert all previously removed components.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Piston on a Piaggio Vespa GTS 125?
How to Replace the Piston on a Piaggio Vespa GTS 125?
Vespa Gts 125 To replace the piston on a Piaggio Vespa GTS 125, loosen the screws securing the valve cover to the engine block after removing all connectors and ma…
How to Replace the Brake Pads of the Piaggio Vespa 125 GTS?
How to Replace the Brake Pads of the Piaggio Vespa 125 GTS?
Vespa Gts 125 To replace the brake pads of the Piaggio Vespa 125 GTS, follow the same procedure for both the front and rear wheels: in both cases, you will need to…
How to Replace the Levers on the Piaggio Vespa GTS 125?
How to Replace the Levers on the Piaggio Vespa GTS 125?
Vespa Gts 125 To replace the levers on the Piaggio Vespa GTS 125, loosen the nuts that secure the levers to their housing so that you can fully remove the pins at …

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos