Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Ciao
    4. : How to disassemble and clean the Piaggio Ciao carburettor

Model: Piaggio Ciao
Part: Carburetor
How to disassemble and clean the Piaggio Ciao carburettor

Let's briefly see in this guide the instructions that will allow us to disassemble and clean the carburettor of the Piaggio Ciao, but also of the Si è del Garelli. First of all, put the central stand and start unscrewing the screw of the intake manifold clamp; then we disconnect the throttle cable and the air filter cable, as shown in the video. At this point we disassemble our carburettor, removing the tank and the petrol filter; then disassemble and clean the sprays with a jet of compressed air, consequently replacing all the carburettor gaskets!


Posted on 25 November 2022 by ScegliAuto

Change the Ducati Hypermotard engine oil and oil filter

Below we will see the main steps that will allow us to carry out the routine maintenance service, replacing the engine oil and oil filter of the Ducati Hypermotard motorcycle. First of all we put the stand on our motorbike and we begin to unscrew the vent bolt that we find under the engine, letting it drain in a container for about ten minutes; then we go and unscrew the oil filter cartridge, screwing the new one by hand and then gently tighten it, as shown in the video. Finally, unscrew the filler cap and top up again!

Watch the video!


by ScegliAuto

More videos