Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the throttle cable of the Piaggio NRG, you need to unscrew the screws that secure the panels around the under-seat compartment, allowing access to the components underneath. Once all the panels have been removed, you will also need to detach those located in the footwell and the inner part of the steering column to locate the entire throttle cable: this must be disconnected from both ends at the grip and at the throttle valve, located at the bottom of the scooter. Then, you can insert the new replacement part, reassembling all the components you just removed.

Updated on 9 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Air Filter on the Piaggio NRG?
How to Replace the Air Filter on the Piaggio NRG?
(Various brands) Nrg To replace the air filter on the Piaggio NRG, loosen the screws securing the cover of the casing located on the left side of the bike, just above the…
How to replace the air filter on the Piaggio NRG?
How to replace the air filter on the Piaggio NRG?
(Various brands) Nrg To replace the air filter on the Piaggio NRG, loosen the screws securing the cover of the casing located directly above the transmission casing, near…
Removing the Starter Motor from a Piaggio NRG 50
Removing the Starter Motor from a Piaggio NRG 50
(Various brands) Nrg In this brief and simple guide, see how to remove and replace the starter motor of the Piaggio NRG 50 2-stroke scooter. First, unscrew and remove the…

Replacing the Front Headlamp Bulb on the Kymco Like 125

This guide will show you the main steps to disassemble and replace the front headlamp bulb on the Kymco Like 125 scooter. First, place the scooter on its centre stand and begin to remove the front headlamp from the instrument panel by unscrewing the fixing screws; then disconnect the electrical connector of the bulb and remove the rubber protective cover, as shown in the video. At this point, unclip the metal spring to remove and replace the bulb with a new one of the correct type and with the same fitting, reassembling everything!

Watch the video!


by ScegliAuto

More videos