|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Sprint 150
To replace the rear-view mirror on the Piaggio Vespa Sprint 150, loosen the nut at the base of the mirror support using a suitable spanner. Once the nut is fully loosened, rotate the mirror counter-clockwise to remove it from its housing. After removing the old mirror, completely detach the nut at the base and attach it to the new mirror. Insert the new mirror into its socket and secure it with the nut at the base.
Updated on 12 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Sprint 150
To replace the engine oil on the Piaggio Vespa Sprint 150, loosen the drain plug located at the central lower area of the vehicle. Once the plug is l…
Vespa Sprint 150
In order to replace the battery of the Piaggio Vespa Sprint 150, you need to loosen the screws that secure the panel in the central part of the footr…
Vespa Sprint 150
You can replace the transmission on the Piaggio Vespa Sprint 150 by loosening the screws that secure the dedicated cover located at the rear wheel. O…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |