Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb of the Piaggio Vespa PX 125

Model: Piaggio Vespa Px 125
Part: Headlight bulb

Video tutorial

In this guide, discover how to remove and replace the dipped beam bulb of the front headlight of the Piaggio Vespa PX 125. First, place your vehicle on the centre stand and start removing the instrument cluster by unscrewing the two screws found underneath; then disconnect the electrical connector of the headlight bulb, removing the bulb itself, as shown in the video.

At this point, install the new bulb of the correct type and fitting; reconnect it and check its operation, finally reassembling the instrument cluster!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to replace the headlamp bulb on the Piaggio Vespa PX 125?
How to replace the headlamp bulb on the Piaggio Vespa PX 125?
Vespa Px 125 To replace the headlamp bulb on the Piaggio Vespa PX 125, loosen the screws securing the upper panel of the front fairing: the screws will be located…
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Vespa Px 125 Below are the instructions for removing and replacing the front headlamp bulb on a Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First, pla…
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 This guide outlines the steps to remove and replace the handlebar cover and front headlight on the Piaggio Vespa PX 125 and Lml Star 125. First, plac…

How to Replace the Front Brake Pads on a Kymco Gran Dink 250

To replace the front brake pads on a Kymco Gran Dink 250, loosen the screws that secure the front brake caliper to detach it from the corresponding disc. Once the caliper is detached, remove the pads inside it and insert the new replacement pads into their housing. After inserting them, reposition the caliper onto the corresponding disc and secure it with the appropriate bolts. After installation, check that the front brake functions correctly.

Watch the video!


by ScegliAuto

More videos