Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125

Model: Piaggio Vespa Px 125
Part: Headlight bulb

Video tutorial

Below are the instructions for removing and replacing the front headlamp bulb on a Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First, place the scooter on its centre stand and start by removing the speedometer and the upper plastic cover of the handlebars by unscrewing the lower screws; then disconnect the electrical connector of the dipped beam bulb, removing it along with the bulb holder, as shown in the video.

Replace the bulb with a new one of the correct type and fitting, and finally reassemble the speedometer.


Posted on 1 May 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb of the Piaggio Vespa PX 125
Replacing the Headlight Bulb of the Piaggio Vespa PX 125
Vespa Px 125 In this guide, discover how to remove and replace the dipped beam bulb of the front headlight of the Piaggio Vespa PX 125. First, place your vehicle …
Replace the Front Headlight Bulb on a Piaggio Vespa Px
Vespa Px 125 First, unscrew the four screws from underneath that secure the front fairing around the headlight. Once done, lift the upper part of the fairing with…
How to replace the front brake pads on Piaggio Vespa PX 125?
How to replace the front brake pads on Piaggio Vespa PX 125?
Vespa Px 125 You can replace the front brake pads on the Piaggio Vespa PX 125 by first removing the wheel from its housing: it can be detached from the bottom of …

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos