Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
First, unscrew the four screws from underneath that secure the front fairing around the headlight. Once done, lift the upper part of the fairing without removing it (as it is still connected); the important thing is to access the two screws of the headlight clearly shown in the video. Unscrew them and also unscrew the central 7 mm screw that secures the headlight from underneath. Remove the headlight and unclip the two clips holding the bulb inside. Replace it and proceed in reverse until fully reassembled. Check the proper functioning of the bulb.

Updated on 14 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the headlight bulb of the Piaggio Vespa PX 125?
How do you replace the headlight bulb of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the headlight bulb of the Piaggio Vespa PX 125, you need to loosen the screws that secure the upper panel of the front fairing: t…
Replacing the Headlight Bulb of the Piaggio Vespa PX 125
Replacing the Headlight Bulb of the Piaggio Vespa PX 125
Vespa Px 125 In this guide, discover how to remove and replace the dipped beam bulb of the front headlight of the Piaggio Vespa PX 125. First, place your vehicle …
How do you replace the front headlight of the Piaggio Vespa PX 125?
How do you replace the front headlight of the Piaggio Vespa PX 125?
Vespa Px 125 To replace the front headlight of the Piaggio Vespa PX 125, you need to pry with an object to detach the panels located at the front of the motorcycl…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos