Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide briefly outlines the instructions for removing and replacing the exhaust of the Piaggio Ciao, as well as the Bravo and Garelli. First, place the central stand and begin to unscrew the fixing screws of the transmission cover located on the left; then use a socket spanner to unscrew the two nuts of the exhaust manifold, secured to the cylinder studs, as shown in the video. At this point, remove the exhaust along with the silencer, replacing it with the new one, applying the reverse procedure for reassembly!

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
Ciao .. the Piaggio Ciao, as well as the Si, Bravo, and Garelli. First, put the central stand down and start by removing the plastic cover above the carburettor;.. …
How to Change the Inner Tube on the Piaggio Ciao - SI - Bravo - Garelli
How to Change the Inner Tube on the Piaggio Ciao - SI - Bravo - Garelli
Ciao .. the Piaggio Ciao, as well as the SI, Bravo, and Garelli. First, place the central stand and start by removing the rear wheel; to do this, remove the.. …
How to Remove the Pedal Assembly on Piaggio Ciao, Si, Bravo, Garelli
How to Remove the Pedal Assembly on Piaggio Ciao, Si, Bravo, Garelli
Ciao .. Piaggio Ciao, as well as on the Si, Bravo, and Garelli, by following these simple steps. First, place the central stand and start by unscrewing the.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos