Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3
Part:

In this video, see how to remove the inner shield of the Piaggio MP3: Start by removing the footrest bracket located on the floor, then the rear screw of the floor itself. Pry and remove the cover. Now, go to the handlebars and remove the screws holding the shield at the top. We will also pry in the area of the key to remove its frame: just below, there is a central screw that holds the front shield, allowing us to remove it easily. Now we can unscrew the screws located inside, which, once removed, will allow us to take off the inner shield: but be careful: there is a large screw attached to the frame. If we do not remove this, the shield will not come off.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlamp on the Piaggio MP3
Removing the Front Headlamp on the Piaggio MP3
Mp3 In this video, you will find instructions to remove the front headlamp from the Piaggio MP3 scooter in simple and quick steps. First, remove the fron…
How to Fix the Roll Lock System on the Piaggio MP3
How to Fix the Roll Lock System on the Piaggio MP3
Mp3 In today's video, we will see how to intervene on the roll lock system of the Piaggio MP3. Specifically, this concerns the electronic lock of the sco…
How much does it cost to replace the Roll lock mechanism in the Piaggio MP3?
How much does it cost to replace the Roll lock mechanism in the Piaggio MP3?
Mp3 The Roll lock, on Piaggio scooters, refers to the automatic locking mechanism of the vehicle when stopped on a sloping road. The replacement process …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos