Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The air duct on the Piaggio Liberty 125 is simply held in place by a snap-fit mechanism. There are no screws, bolts, clips, or anything else holding it in place. Therefore, removing it is very simple, and its replacement does not require any special tools except for gloves, which are entirely optional if you are concerned about getting your hands dirty. To operate, lower yourself and locate the duct connected to the air filter box. Once found, grasp it with your hands and detach it from both ends. Then take the new duct and connect it to the scooter.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Piaggio Liberty 125 - 50
How to replace the air filter of the Piaggio Liberty 125 - 50
Liberty 125 Follow these steps to remove and replace the air filter cartridge of the Piaggio Liberty 125 scooter, as well as the 50. First, place your scooter on…
How do you replace the transmission of the Piaggio Liberty 125?
How do you replace the transmission of the Piaggio Liberty 125?
Liberty 125 In order to replace the transmission of the Piaggio Liberty 125, you need to loosen the screws that fix the cover located near the rear wheel, on the…
How do you replace the ignition switch of the Piaggio Liberty 125?
How do you replace the ignition switch of the Piaggio Liberty 125?
Liberty 125 To replace the ignition switch of the Piaggio Liberty 125, you need to loosen the screws that secure the front fairing of the motorcycle to its housi…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos