Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on Piaggio Liberty 125

Model: Piaggio Liberty 125
Part: Headlight bulb

Video tutorial

In this video, we will see how to remove and replace the front headlight bulb on a Piaggio Liberty 125. First, we will remove the screws that hold the headlight cover: you will find them underneath and at the front of the fairing. Then, we will remove the mirrors and take out the headlight; next, disconnect the electrical connector of the bulb and remove the rubber protection cap. All that’s left is to unscrew the ring and pull out the bulb, as shown in the video; replace it with the correct type of bulb (H4 type) and reassemble everything!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Piaggio Liberty 125?
How to Change the Engine Oil of the Piaggio Liberty 125?
Liberty 125 To change the engine oil of the Piaggio Liberty 125, loosen the oil drain plug located at the central lower area of the bike, near the exhaust. By un…
How to open and repair the storage compartment of the Piaggio Liberty 125
How to open and repair the storage compartment of the Piaggio Liberty 125
Liberty 125 These short and simple instructions will show us how to open and repair the storage compartment drawer of the Piaggio Liberty 125 scooter. First, we …
How do you bleed the brakes on the Piaggio Liberty 125?
How do you bleed the brakes on the Piaggio Liberty 125?
Liberty 125 In order to bleed the brakes on the Piaggio Liberty 125, you will need to loosen the small drain plug located near the front and rear brake calipers.…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos