|
Do it yourself
| |||
| ||||
Model: Piaggio Zip
To remove the speed sensor from the Piaggio Zip, loosen the screws that secure the two side nuts of the front wheel, allowing it to be detached from its housing at the base of the fork. Once the wheel has been removed, disconnect the sensor cable located to the left of the wheel, completely removing it from its seat. After the old sensor has been removed, insert the new one, securing it in place, connecting it to the cable, and reattaching the front wheel to the fork.
Updated on 2 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Zip
To replace the bulb on the Piaggio Zip 50, you will need to unscrew the screws of the handlebar casing to access the optical group. Once the panels a…
Zip
To replace the exhaust fitted on the Piaggio Zip, loosen the screws that secure the exhaust terminal to its housing. Once the mounting screws are loo…
Zip
In order to replace the exhaust pipe of the Piaggio Zip, you need to loosen the screws that fix the exhaust terminal to its housing, on the right sid…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |