Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Piaggio Vespa GTS 300

Model: Piaggio Vespa Gts 300
Part: Battery

Video tutorial

Briefly review the instructions to remove and replace the battery of the Piaggio Vespa GTS 300 scooter. First, place the scooter on the centre stand and begin by removing the central cover located on the footboard by unscrewing the fixing screws; then disconnect both battery terminals (positive and negative) to remove the old battery and replace it with a new one, as shown in the video.

Install the suitable battery with the same amperage and part number; connect it electrically and finally refit the footboard cover!


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Piaggio Vespa GTS 300?
How to replace the battery of the Piaggio Vespa GTS 300?
Vespa Gts 300 To replace the battery of the Piaggio Vespa GTS 300, loosen the screws securing the panel in the centre of the scooter's footwell. Once the screws ar…
How to Replace the Exhaust on a Piaggio Vespa GTS 300
How to Replace the Exhaust on a Piaggio Vespa GTS 300
Vespa Gts 300 To replace the exhaust on a Piaggio Vespa GTS 300, you need to loosen the screws that secure it to its housing on the right side of the scooter, near…
How to Set the Clock on a Piaggio Vespa GTS 300
How to Set the Clock on a Piaggio Vespa GTS 300
Vespa Gts 300 Today, you will see, in this short and simple guide, how to adjust the clock on the Piaggio Vespa GTS 300 scooter. First, place the scooter on its ce…

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos